We have a complete range of Inserts for Plastics, be it a standard insert or customize type, to meet any size, performance, or strength requirement. With the wide series range of inserts, we are able to recommend a suitableinsert for different type of installation methods (heat staking, ultrasonic, insert moulding), application and function with torque requirement. For insert moulding installation, you can contact our sale person for the recommended detail. All the inserts are fully compliance to ROHS and REACH.
Sonic-Insert
Insert with helical knurl which enable it to provide a combination of high torque and pull out resistance.
Taper-Insert
Diagonal knurls and upwardly directed vanes provide superior assembly and high torque value.
Heat-Insert
Use in amorphous thermoplastics. With the round knurls, it avoid stress raising sharp crests and lower the risk of cracks in plastic.
Mini-Insert
An ideal for smaller plastic products which has thin boss wall and limited space within the plastic.
Fin-Insert
With the sharp fins and straight knurls, the insert is suitable for press In installation for most thermoplastic materials.
SP-Insert
The sharp knurl pattern is able to cut into hard brittle thermoset material with a lower radial stresses.
Banc-Insert
Press In expansion inserts for hard thermosetting plastics. The diamond knurl will provide a pull-our resistance.
Flo-Insert
Three helical knurls with blind end threaded insert provide a combination of high torque and pull out resistance.
| Type of Brass Inserts | Installation Methods | |||
| Heat Staking | Ultrasonic | Press In | Insert Moulding | |
Sonic-Insert |
- | |||
Taper-Insert |
- | |||
Heat-Insert |
- | |||
Mini-Insert |
- | - | - | |
Fin-Insert |
- | - | - | |
SP-Insert |
- | - | - | |
Banc-Insert |
- | - | - | |
Flo-Insert |
- | - | ||
The above brass inserts are able to cross reference to any of the PEM, DODGE or PSM inserts' speicification. For insert moulding installation, you can contact our sale person for the recommended detail specification.
thread forming screws FOR PLASTIC
Thread forming screws are designed for manufacturing assembly process, as their threads have a degree flank angle thread that slices through the material. This enable the thread not only avoid inducing high stress level, it offers extra grip and resistance to pull out. Thread forming screw provides a fast, economical, production line solution to fixing plastic and light alloy components where the need for re-use and high assembly torque is not a major factor.
Pan Flange Head
Pan Head
Countersunk Head
| Screw Configuration | ||||
| Head Type | Pan Head | Pan Flange | Hex Flange | Countersunk |
| Cheese Head | Socket Cap | Button | Oval | |
| Recess Type | Philips | Pozi | Torx | Slot |
| Hex Socket | Square | Tri-Wing | Philips Slot | |
| Thread Type | Thread Forming | Self Tapping | ||
| Material | Brass | Steel | Stainless Steel | |
| Finishing | Nickel Plating | Zinc Plating | Passivation | En Plating |
| Black Oxide | Nylon Patching | |||
Cross reference to PT Screw, Plastite Screw, DIN Standard